Use Warning Signs to Designate Particular Hazards

The use of warning signs to designate particular hazards is not just a good idea. It’s the law.

By

The OSHA Laboratory Standard 29CFR1910.1450 requires that those areas in which particularly hazardous substances (select carcinogens, reproductive toxins, and highly toxic substances) are used be clearly designated. The OSHA Hazard Communication Standard requires the labeling of hazardous chemicals in the workplace.

Hazard labeling should not be limited to chemical hazards. Mechanical, biological, physical, noise, radiation, hi/low pressure, electrical, and stress hazards should all be clearly indicated with appropriate signs.

Good signs should go beyond hazards and extend to the facilities and equipment we use to deal with these hazards: emergency equipment and emergency facilities. OSHA regulations require the emergency equipment be identified with prominent signs.

Take a good careful look at your labels and see if they can’t be improved. Can you make it easier to recognize the hazard and the means of dealing with it? Are cabinets for corrosive storage clearly labeled? Are the circuit breakers in all your electric panels clearly labeled? Do preserved specimens have the identity of the preservative and appropriate hazard warnings on the labels?

Published In

Growing Green Magazine Issue Cover
Growing Green

Published: April 7, 2014

Cover Story

Growing Green

A voluntary program to change lab practices saves money while promoting sustainability

Featured Articles

Shifting to Greener Fuels

Renewable energy today is predominantly derived from wood, corn, wind, and water. The majority of these first-generation biofuels are burned, which causes greenhouse gases to be released and adds to carbon emissions.