Photo courtesy of Washington University in St. Louis
Chromium is an odorless, tasteless metallic element. One form, chromium-3, is essential to human health and is found in many vegetables, fruits, meats, and grains and is often included in multi-vitamins. Its cancer-causing cousin, the chromium-6 infamous from the California exposure and Hollywood movie about Erin Brockovich, occurs naturally but is also produced in high quantities by industry, and can contaminate both soil and groundwater.
An engineer at Washington University in St. Louis has found a new way to convert the dangerous chromium-6 into common chromium-3 in drinking water, making it safer for human consumption.
Photo courtesy of Washington University in St. Louis“The health effects are quite well-known. It’s very potent as an inhaled contaminant, but in drinking water chromium-6 definitely has a negative impact on human health,” said Daniel Giammar, the Walter E. Browne Professor of Environmental Engineering at the School of Engineering & Applied Science.
Scientists have previously converted chromium-6 to chromium-3 in a chemical process using iron. During the course of the new research, recently published in the journal Environmental Science & Technology, Giammar and his team took a novel approach, using electricity to do the job.
“Electrocoagulation is the particular approach we used to introduce iron into the water,” Giammar said. “Typically, you would use an iron salt and physically add a dose to the water. Electrocoagulation uses two pieces of iron metal in the water, you apply a voltage between them, and that is how you dose iron into the water and convert the chromium-6.”
Electrocoagulation systems are widely available, and Giammar finds using electricity as opposed to chemical alteration is an easier, more precise and scalable process.
“It allows you to tailor your dose in a very easy way,” Giammar said. “Electronic controls can be easier than chemical feeding controls. It also allows it to be more applicable for remote operations, because you don’t have to have a source of chemicals. You just use the same pieces of iron, and you can treat the water for a long time.”
Giammar’s team previously used the electrocoagulation approach to remove arsenic from drinking water; this is the first time it has been done to convert chromium in drinking water into a safer form. The next step: Researchers hope to use the same technique with selenium, a metal that’s notoriously difficult to remove from water.