Labconco's RapidVap® Vertex Dry Evaporator uses a dry heat block to quickly evaporate samples under nitrogen steam.
Because combinatorial chemisty requires multiple samples to be run in parallel, the RapidVap Vertex Evaporator, accomodating up to 50 samples, is the perfect choice for this type of research and development. During operation, each product is synthesized in separate reaction vessels. The advantage of parallel synthesis is that the composition of each compound is known, but generally, the split and mix procedure can generate many more compounds in the same amount of time. The samples are evaporated in the Vertex simultaneously which speeds throughput and keeps all samples under the same conditions. The nitrogen supply is controlled in rows of 10 so nitrogen can be conserved in small sample runs.
The RapidVap Vertex accomodates tube sizes ranging from microcentrifuges up to 28mm in diameter. A convenient LCD touch screen allows easy programming of time and temperature and up to ten different programs may be stored in its microprocessor for protocol consistency. A microprocessor-controlled heater supplies heat to the block and is programmable from 30°C to 100°C in 1 degree increments.
Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Heat helps speed the process. The samples are angled thus increasing the surface area for faster evaporation and optimized recovery. The temperature sensor probe may be positioned on the block or in a sample to monitor temperature.
There are seven internchangeable aluminum blocks to choose from and are sold separately - five hold samples as small as two milliliters; two additional blocks hold 28 mm tubes with sample sizes of 40 and 60 milliliters.
Xpert® Nano™ Enclosures Protect Users During Nanoparticle Manipulation and Dry Powder Chemical Handling
Xpert Nano Enclosures provide user protection by keeping hazardous powders and particulates contained during procedures such as nanoparticle manipulation and dry powder chemical handling. The patented containment design filters the air through a 99.999% bag-in/bag-out ULPA filter before returning the clean air to the laboratory. The all stainless steel interior (sides, work surface, removable baffle and removable airfoil) is designed for easy wipe down and cleaning procedures. An optional built-in ionizer neutralizes static charge on interior surfaces. The Xpert Nano is the first and only enclosure validated for nanomaterial containment. Learn more at www.labconco.com.
Jenny Sprung, Product Manager
816-822-37236, 88114 Prospect Avenue
Kansas City, MO 64132
Toll free: 800-732-0031, www.labconco.com