Lab Manager | Run Your Lab Like a Business

News

3D-Printed Guide Helps Regrow Complex Nerves After Injury

Research could help more than 200,000 people annually who suffer from nerve injuries or disease

by University of Minnesota
Register for free to listen to this article
Listen with Speechify
0:00
5:00

3D scans of a nerve are used to create a custom regeneration guide3D scans of a nerve are used to create a custom regeneration guide.Image courtesy of the University of MinnesotaMINNEAPOLIS / ST. PAUL (09/18/2015)—A national team of researchers has developed a first-of-its-kind, 3D-printed guide that helps regrow both the sensory and motor functions of complex nerves after injury. The groundbreaking research has the potential to help more than 200,000 people annually who experience nerve injuries or disease.

Collaborators on the project are from the University of Minnesota, Virginia Tech, University of Maryland, Princeton University, and Johns Hopkins University.

Nerve regeneration is a complex process. Because of this complexity, regrowth of nerves after injury or disease is very rare, according to the Mayo Clinic. Nerve damage is often permanent. Advanced 3D printing methods may now be the solution.

A 3D-printed nerve regeneration pathway implanted in a rat helped to improve walking in 10 to 12 weeks after implantationA 3D-printed nerve regeneration pathway implanted in a rat helped to improve walking in 10 to 12 weeks after implantation.Image courtesy of the University of MinnesotaIn a new study, published today in the journal Advanced Functional Materials, researchers used a combination of 3D imaging and 3D printing techniques to create a custom silicone guide implanted with biochemical cues to help nerve regeneration. The guide’s effectiveness was tested in the lab using rats.

To achieve their results, researchers used a 3D scanner to reverse engineer the structure of a rat’s sciatic nerve. They then used a specialized, custom-built 3D printer to print a guide for regeneration. Incorporated into the guide were 3D-printed chemical cues to promote both motor and sensory nerve regeneration. The guide was then implanted into the rat by surgically grafting it to the cut ends of the nerve. Within about 10 to 12 weeks, the rat’s ability to walk again was improved.

“This represents an important proof of concept of the 3D printing of custom nerve guides for the regeneration of complex nerve injuries,” said University of Minnesota mechanical engineering professor Michael McAlpine, the study’s lead researcher. “Someday we hope that we could have a 3D scanner and printer right at the hospital to create custom nerve guides right on site to restore nerve function.”

Scanning and printing takes about an hour, but the body needs several weeks to regrow the nerves. McAlpine said previous studies have shown regrowth of linear nerves, but this is the first time a study has shown the creation of a custom guide for regrowth of a complex nerve like the Y-shaped sciatic nerve that has both sensory and motor branches.

“The exciting next step would be to implant these guides in humans rather than rats,” McAlpine said. In cases where a nerve is unavailable for scanning, McAlpine said there could someday be a “library” of scanned nerves from other people or cadavers that hospitals could use to create closely matched 3D-printed guides for patients.

In addition to McAlpine, major contributors to the research team include Blake N. Johnson, Virginia Tech; Xiaofeng Jia, University of Maryland and Johns Hopkins University; and Karen Z. Lancaster, Esteban Engel, and Lynn W. Enquist, Princeton University.

This research was funded by grants from the National Institutes of Health, the Defense Advanced Research Projects Agency, the Maryland Stem Cell Research Fund, and the Grand Challenges Program at Princeton University.

To read more about the study entitled “3D Printed Anatomical Nerve Regeneration Pathways,” visit the Advanced Functional Materials website.