Titration in Wine Analysis

As with all process industries for high-value products, for winemakers the process is the product.

By Angelo DePalma

Winemaking begins with ordinary fruit and ends, sometimes decades later, with a solution of hundreds of identifiable acids, esters, salts, small molecules, and, of course, ethyl alcohol. Although basic viticulture and fermentation have been around for millennia, modern technology— including analytic instrumentation—has greatly improved consistency and quality. High-end producers tout the uniqueness of their grape blends, growing conditions, and, above all, how grapes are processed and turned into $2,000-per-bottle Chateau Lafite- Rothschild. As with all process industries for high-value products, for winemakers the process is the product.

Yet in a manufacturing environment, producers are limited to studying just a fraction of the ingredients contributing to a vintage’s characteristic taste and quality.

In this age of readily available high-end analytics, vintners remain interested, by and large, in a handful of diagnostic parameters, among them titratable acidity, volatile acidity, and free and total sulfur dioxide, all of which are accessible through titration.

That’s not to say that more sophisticated approaches to assessing wine quality are not used. Liquid chromatography- mass spectrometry, for example, provides a signature spectrum of volatile and semi-volatile taste and quality attributes. Bruker (Billerica, MA) has an application note on nuclear magnetic resonance analysis for profiling these components, and inductively coupled plasma has been a mainstay for oenologic elemental analysis since at least the 1980s.

Analytics and reality

Unfortunately, for most commercial wineries competing in increasingly global markets, gas chromatography or liquid chromatography is impractical. “The acquisition cost of these instruments is prohibitive, maintaining staff knowledgeable enough to run those instruments is unrealistic, and there are alternative benchtop, wetchemistry analytical methods that meet their needs just as well,” says Maureen Moroney, research associate at the Midwest Grape and Wine Industry Institute (Ames, IA).

Titration has survived in wine labs in part because these signature quality attributes often act as surrogates for more complex, difficult-to-quantify constituents. Additionally, complex instrumental analysis takes time and diverts resources from more pressing activities, such as harvesting before a drenching rain or keeping track of the contents of 400 barrels.

Download Now: The Lab Manager Titrators Resource Guide

“Titration methods, including associated sample preparation, vary depending on what is being analyzed, but the principle of titrating to an end point is always the same,” Moroney says. Variability extends to the degree to which methods are automated. Small winery labs often perform titrations manually, and conduct the tests during production and afterward as a quality check.

“Volatile acidity and sulfur dioxide are both major quality parameters for wine, with legal limits set by the Alcohol and Tobacco Tax and Trade Bureau [TTB], a unit of the U.S. Department of the Treasury.”

Constantly evolving parameters

“Wine producers need to keep an eye on product during processing because the chemistry of juice and wine is in constant flux until the product is finished, and even beyond that. No two batches are the same, so there is no formula for consistent quality,” Moroney continues. “In-process testing helps guide decision-making on the next process step [and] helps detect problems early, with the potential to intervene appropriately.”

For example, sharply rising volatile acidity during fermentation indicates that microbes such as acetobacter, which produce acetic acid (vinegar) and ethyl acetate, may have entered the system or that the batch has been exposed to oxygen.

For sulfur dioxide (SO2), an additive present in most commercial wines that prevents oxidation and microbial spoilage, free SO2 is protective whereas the bound chemical is not. Winemakers must therefore balance fixed and free SO2, the concentrations of which they determine through titration.

Titratable acidity is more related to the consumer’s sensory perception of wine. “Once the wine has finished fermentation and/or malolactic conversion, it tends to remain fairly stable unless other interventions are made; for example, acidification, deacidification, or cold stability achieved by precipitation of potassium bitartrate,” Moroney notes. “Of the three parameters, titratable acidity is probably measured least frequently, especially as many winemakers tend to rely more heavily on pH measurements for decision-making.”

“Vintners use titration throughout the entire production process,” says Lori Spafford, titration product manager at Metrohm USA (Riverview, FL). “It lets you check raw ingredients—you can check the batch while fermentation is taking place and as a final quality control [QC]. The same titration that is performed during production is also used as a final QC test.”

What to consider

As with pharmaceuticals, regulators outline in detail what they expect from quality and wholesomeness testing, but they do not mandate or even recommend specific methods. The American Society for Enology and Viticulture, which has no formal regulatory or legal status, recommends the Ripper method for free SO2 and titration-based aeration-oxidation methods to complement segmented flow analyzers, enzymatic assays, colorimetric analyzers, flow injection analysis, and Fourier-transform infrared spectroscopy.

Winery laboratories have wider latitude with respect to which instrument they buy; but in addition to basic titration, they need to consider how a system keeps records, how it connects to computers and other instrumentation, and the instrument’s throughput. Once purchased, the cost of consumables and (excluding depreciation) the price per test will be very similar for different systems, according to Moroney.

Related Article: Wine Proficiency Testing Expands

“Instrument cost is a major factor, but winery labs should also consider which parameters they’re planning to test for—some titrators can be set up for multiple analytes. Users should also consider the user interface, the expected throughput, and the availability of service and support from the instrument’s vendor.

Spafford advises potential buyers to consider a system’s modularity, its ease of use, and the vendor’s experience. “Having a titration system that will handle today’s workload, but [that] can easily be expanded by adding modules, is important for the growing winery business. User friendliness is important because winery lab staff is sometimes seasonal. Also, doing business with a vendor with decades of experience titrating wine will help you ensure that any question, challenge, or need you have will be met when it matters the most.”

Metrohm has lately focused its titration efforts on highthroughput instrumentation, an important consideration for any industry that should keep an eye on processes in real time but always seems to find an excuse not to. The company’s OMNIS titrator line promises greater efficiency and throughput.

So, with all the instrumentation in the world at their disposal for in-process and post-production quality-checking, why do we never hear about large winemakers discarding 100,000-liter batches?

Mostly because it rarely happens. “There is typically no rejecting a batch of wine,” Moroney explains. Wine failing to meet quality standards may be blended into other products or sold on the bulk market. “Because wine is low risk in terms of consumer safety, and because many small wineries simply can’t afford to dump a significant portion of their stock in a given year, a flat-out rejection is almost unheard of.”

Think about that before purchasing your favorite wine in a box or that $100 “vintage of the century.”


For additional resources on tirators, including useful articles and a list of manufacturers, visit www.labmanager.com/titrators 

Categories: Product Focus

Published In

Taking Care of Business Magazine Issue Cover
Taking Care of Business

Published: February 4, 2019

Cover Story

We have updated our Privacy Policy to make it clearer how we use your personal data.
Please read our Cookie Policy to learn how we use cookies to provide you with a better experience.