Lab Manager | Run Your Lab Like a Business

Use Warning Signs to Designate Particular Hazards

The use of warning signs to designate particular hazards is not just a good idea it's the law.

by James A. Kaufman
Register for free to listen to this article
Listen with Speechify
0:00
5:00

The use of warning signs to designate particular hazards is not just a good idea — it's the law. The OSHA Laboratory Standard 29CFR1910.1450 requires that those areas in which particularly hazardous substances (select carcinogens, reproductive toxins, and highly toxic substances) are used be clearly designated. The OSHA Hazard Communication Standard requires the labeling of hazardous chemicals in the workplace.

Hazard labeling should not be limited to chemical hazards. Mechanical, Biological, Physical, Noise, Radiation, Hi/Low Pressure, Electrical, and Stress hazards should all be clearly indicated with appropriate signs.

Get training in Technical Safety Topics and earn CEUs.An IACET-accredited five-course stream in the Academy.
Technical Safety Topics Stream

Good signs should go beyond hazards and extend to the facilities and equipment we use to deal with these hazards: emergency equipment and emergency facilities. Take a good careful look at your label and see if it can't be improved to make the hazard and the means of dealing with it easier. Are cabinets for corrosive storage clearly labeled? Are the circuit breakers in all your electric panels clearly labeled? Do preserved specimens have the identity of the preservative and appropriate hazard warnings on the labels?