Lab Manager | Run Your Lab Like a Business
Green lasers

A Step towards Next-Generation Magnetic Devices That Control Light

Breakthrough method uses laser heating to create transparent magnetic materials

by Tohoku University
Register for free to listen to this article
Listen with Speechify
0:00
5:00

In a significant advancement in optical technology, researchers from Tohoku University and Toyohashi University of Technology have developed a new method for creating transparent magnetic materials using laser heating. This breakthrough, recently published in the journal Optical Materials, presents a novel approach to integrating magneto-optical materials with optical devices, a long-standing challenge in the field.

"The key to this achievement lies in creating 'Cerium-substituted Yttrium Iron Garnet (Ce:YIG),' a transparent magnetic material, employing a specialized laser heating technique," points out Taichi Goto, associate professor at Tohoku University's Electrical Communication Research Institute (RIEC) and co-author of the study. "This method addresses the key challenge of integrating magneto-optical materials with optical circuits without damaging them—a problem that has hindered advancements in miniaturizing optical communication devices."

Magneto-optical isolators are vital for ensuring stable optical communication. They act like traffic directors for light signals, allowing them to move in one direction but not the other. Integrating these isolators into silicon-based photonic circuits is challenging due to the high-temperature processes typically involved.

As a result of this conundrum, Goto and his colleagues focused their attention on laser annealing—a technique that selectively heats specific areas of a material by laser. This allows for precise control, influencing only the targeted regions without affecting surrounding areas.

Previous studies had used this to selectively heat bismuth-substituted yttrium iron garnet (Bi: YIG) films deposited on a dielectric mirror. This allows the Bi:YIG to crystalize without affecting the dielectric mirror.

However, when working with Ce:YIG, an ideal material for optical devices due to its magnetic and optical properties, problems arise because exposure to the air results in unwanted chemical reactions.

To avoid this, the researchers engineered a new device that heats materials in a vacuum, i.e., without air, using a laser. This allowed for precise heating of small areas (about 60 micrometers) without altering the surrounding material.

"The transparent magnetic material created through this method is expected to significantly enhance the development of compact magneto-optical isolators, crucial for stable optical communication," adds Goto. "Additionally, it opens avenues for creating powerful miniaturized lasers, high-resolution displays, and small optical devices."

- This press release was originally published on the Tohoku University website