Lab Manager | Run Your Lab Like a Business
Image of a fuel cell pump

How Do Scientists Bring Hydrogen Fuel Cells from Laboratory to Public Life?

Researchers report a new method successfully synthesized small-sized Pt intermetallic nanoparticle catalysts

by University of Science and Technology of China
Register for free to listen to this article
Listen with Speechify

Fuel cells, due to their high efficiency and environment-friendly attributes in the process of electricity generation, are gaining popularity for Fuel Cell Vehicles (FCVs) productions, such as automobiles, forklifts, buses, and airplanes. However, the costly nature of producing fuel cell catalysts precludes the mass-production and large-scale application of FCVs.

Fuel cell catalysts are usually made of platinum (Pt) or Pt alloys with transition metals thinly coated onto the porous carbon supports. Pt is an ideal catalytic material as it can withstand the acidic conditions and increase the rate of chemical reactions efficiently. However, it is expensive and has insufficient resource reserves. Therefore, it is urgent to develop and screen new catalysts with low Pt quantity and high catalytic activity for fuel cell commercialization.

In a Science paper published on October 22, 2021, researchers at the University of Science and Technology of China (USTC) of the Chinese Academy of Sciences (CAS) reported a sulfur-anchoring method at high temperature, successfully synthesized small-sized Pt intermetallic nanoparticle (i-NPs) catalysts with ultralow Pt loading and high mass activity. They also established i-NPs libraries including 46 types of Pt nanoparticles (NPs) to screen inexpensive and durable electrode materials as well as explore structure-activity relations of i-NPs systematically.

I-NPs have attracted wide attention because of their unique atomically ordered properties and excellent catalytic performance in many chemical reactions. However, inevitable metal sintering at high-temperature is undesired during the synthesize of i-NPs, which will lead to larger crystallites. Thus, it leads to a decreased specific surface area, lower catalytic activities of the materials, and eventually reduces the utilization rate of Pt, therefore, greatly increasing the cost of fuel cells.

The research team, led by Hai-wei Liang, ingeniously utilized strong Pt-sulfur chemical interactions. They prepared Pt intermetallic on sulfur-doped carbon (S-C) supports in order to suppress NPs sintering at high temperatures, and they were able to obtain atomically ordered i-NPs with an average size of < 5 nm. S-C supports showed such excellent anti-sintering ability that researchers obtained Pt NPs with the average diameter <5 nm after annealing at high temperature, up to 1000?C. However, severe Pt sintering was observed after the same annealing process on commercial carbon black supports.

To take advantage of the anti-sintering property, researchers synthesized 46 types of small-sized Pt-based i-NPs on S-C supports and established i-NPs libraries. Spectral characterizations were measured, and the results verified the strong chemical interactions of Pt-S bonds. Moreover, the X-ray diffraction (XRD) results showed high ordering degree and small size of i-NPs catalysts in libraries, consistent with the statistical analysis of the high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) observations.

“Based on the i-NPs libraries, we can systematically study the relationship between structure and performance of catalysts,” said Liang, “and sufficient samples helped us screen out efficient catalysts that were expected to largely decrease the cost of fuel cells.” Researchers screened i-NPs and applied them to proton-exchange membrane fuel cells (PEMFCs). These catalysts exhibited excellent electrocatalytic performance for oxygen reduction reaction (ORR). Especially in H2-air PEMFC, although the Pt loading of i-NPs was amazingly 11.5 times lower than that of Pt/C cathode, the i-NPs catalysts cathodes showed similar ability to the Pt/C cathode.

This work provides a universal way for the synthesize of Pt alloy catalysts utilized in hydrogen fuel cells. This method raises hopes for reducing the quantity of Pt used, thereby decreasing the cost of fuel cells. “By engineering the porous structures and surface functionalities of carbon supports, the efficiency of fuel cells can be further improved, thus accelerating its transformation from laboratory to the public,” said Liang.

- This press release was provided by the University of Science and Technology of China