Labmanager Logo
plastic pollution from land to sea

iStock

Scientists Track Plastic Pollution From Land to Sea

Researchers in Japan develop a high-resolution map of 1 kilometer grids to track plastic emissions in seas

| 3 min read
Share this Article
Register for free to listen to this article
Listen with Speechify
0:00
3:00

Plastic may be an indispensable part of our daily lives, but its robustness and abundance have led to its overuse, putting a huge burden on the environment. Large emissions of plastic waste result in its accumulation in water bodies: in fact, recent studies have estimated about 0.27 million tons of plastic floating in the world's oceans. Because plastic does not decompose in water, it is a serious hazard for the marine life. Thus, to prevent plastic pollution, it is crucial to understand exactly how plastic is emitted into the oceans. Previous studies have tried to analyze plastic emissions, but they had some limitations: they focused on mostly mismanaged plastic waste and not how these plastic emissions actually originate.

A new method to track plastic emissions from land to sea.
Tokyo University of Science

To this end, a group of scientists at the Tokyo University of Science, led by professor Yasuo Nihei, developed a new method to combat plastic emissions. In a study published in Water, they generated a high-resolution map of 1 km grids of plastic emissions across Japan. 

Want to stay up to date on the latest lab management news?

Subscribe to our free Lab Manager Monitor Newsletter.

Is the form not loading? If you use an ad blocker or browser privacy features, try turning them off and refresh the page.

"If plastic waste continues to flow into the sea, the amount of plastic waste will increase," Nihei explains. "To prevent this, it is necessary to clearly indicate where and how plastic debris is currently being generated."

To begin with, the scientists focused on the different types of plastics: microplastic (MicP), which is less than 5 mm in size, and macroplastic (MacP), which is greater than 5 mm. They understood that controlling MicP was crucial because—owing to its small size—it is particularly hard to recover once it enters the ocean. Moreover, it can easily be ingested by marine organisms, which can negatively affect ecosystems worldwide. To avoid the emission of MicP in water bodies, it was important to find out exactly where these emissions were coming from.


Related Article: Study Suggests Lego Bricks Could Survive in Ocean for Up to 1,300 Years


Figure 1. Schematic of the conceptual framework used to evaluate plastic input from land to sea in this study.
Dr. Yasuo Nihei

The scientists followed a three-step process to map plastic emissions (Figure 1). First, they measured MicP concentration across 70 rivers and 90 sites in Japan and examined the relation between MicP concentration and land characteristics. They collected the ratio of MacP/MicP concentrations to evaluate the MacP concentration from the MicP concentration. Next, to obtain outflow discharge at 1 km grids, they performed a "water balance analysis" in which they measured precipitation of water, distributed into three categories: evaporation, surface runoff, and underground infiltration. Finally, they calculate total plastic emission, which is the product of MicP and MacP concentrations and outflow discharge. Their findings revealed that MicP concentrations and basin characteristics were significantly correlated, meaning that the physical features of water bodies dictate the amount of plastic waste accumulated. Not just this, their analysis helped the scientists to estimate the annual plastic emission in Japan, which ranged from 210 to 4,776 tons/year of total plastic.

Figure 2. Maps of total plastic emissions over 1 km grids in Japan.
Dr. Yasuo Nihei

The scientists then evaluated a high-resolution map of plastic emission over 1 km grids across Japan (Figure 2). They identified the critical areas where plastic emissions were the highest. Their analysis showed that these emissions were high in rivers near urbanized areas, with a high population density. Among these, cities like Tokyo, Nagoya, and Osaka were found to be hotspots for plastic emissions. Thus, this method was useful in understanding exactly where strict countermeasures should be enforced.

Unlike previous studies, this study does not assume that the plastic waste is only proportional to mismanaged plastic waste but, in fact, takes into account the origin of plastic emissions. This makes it easier to implement measures and curb plastic emissions in specific areas. 

"Our findings provide new insights that may be used to draft countermeasures against plastic emissions, thereby reducing outflow of marine pollutants from Japan," Nihei concludes. "We also introduce a new method that can be used to evaluate plastic inputs in other regions of the world."

- This press release was originally published on the Tokyo University of Science website

Loading Next Article...
Loading Next Article...

CURRENT ISSUE - December 2024

2025 Industry and Equipment Trends

Purchasing trends survey results

Lab Manager December 2024 Cover Image