Lab Manager | Run Your Lab Like a Business
Optimised ink printing of pyramid, octopus and turtle from left to right of different protein inks

Fancy a Side of 3D Printed Carrots and Crickets with Your Meal?

Addressing food supply challenges through a more systematic and efficient 3D food printing approach

by Singapore University of Technology and Design
Register for free to listen to this article
Listen with Speechify

As the global population continues to age and grow, the demand for protein-rich food is also expected to increase concurrently. This has also caused concerns on increasing greenhouse gases, and land and water consumption associated with the conventional rearing of animals for food.

In some parts of Africa, Asia, and South America, people have already been turning to alternative sources of proteins from insects, plants, and algae for sustainable, nutrient-rich food. However, the idea of consuming insects might be an uncomfortable concept to digest for the rest of the world.

“The appearance and taste of such alternative proteins can be disconcerting for many. This is where the versatility of 3D food printing rises to the challenge as it can transform the way in which food is presented and overcome the inertia of consumer inhibitions,” explained Professor Chua Chee Kai, co-author from the Singapore University of Technology and Design (SUTD).

For instance, commonly known foods like carrots can be mixed with alternative proteins such as crickets to produce a more familiar taste to consumers. This mixture of carrots and crickets can then be extruded by a 3D food printer to create a visually appealing dish that would appeal to the senses. 

However, the combining of different food inks and optimizing it for 3D food printing is known to be a laborious task as it is usually done using a trial and error-based approach.

Chee Kai and the team from SUTD collaborated with researchers from Khoo Teck Puat Hospital (KTPH) and University of Electronic Science and Technology of China (UESTC) to devise a systematic engineering approach to efficiently incorporate alternative proteins into food inks. Using this approach for the optimization of protein inks, the research team minimized time and resources by reducing experimental runs.

In their study, “Systematic Engineering approach for optimization of multi-component alternative protein-fortified 3D printing food Ink” which was published in Food Hydrocolloids, the team used the established engineering technique, Response Surface Methodology, and applied it for use in 3D food printing.

Professor Yi Zhang, the principal investigator from UESTC explained: “Alternative proteins may become our main source of protein intake in the future. This study proposes a systematic engineering approach of optimizing food inks, thereby enabling easy creations and customizations of visually pleasing, flavorful, and nutritionally adequate food enhanced with alternative proteins. We hope our work would encourage consumers to eat more of these unfamiliar, but sustainable food items.”

The research team used the central composite design approach to optimize the protein ink formulations having three variables—carrot powder, proteins, and xanthan gum. Carrot powder helped provide mechanical strength as well as taste, nutrients, and color to the formulated inks.

Meanwhile, they experimented with alternative proteins such as soy, spirulina, cricket, black soldier fly larvae, and sericin. Formulated inks were tested experimentally for 3D printability and syneresis with optimized inks achieving maximum printability and minimal syneresis.

Aakanksha Pant, corresponding author of the paper and research associate from SUTD added: “This research study can also be generalized for other food ingredients and response of the food inks like texture, printability, [and] water seepage may be included for optimization. The response surface method approach may lead researchers to adopt similar method for optimizing 3DFP food inks constituting complex multicomponent food ingredients.”

- This press release was provided by the Singapore University of Technology and Design